All Mechanical devices are considered to be cleaned regularly. In this same way, gun using for a long time need some maintenance. This process calls firearms which always require a good cleaning and lubrication once used for some time.
Let’s have a look at some basic steps which every gun holder can conduct:
Step #1 Unload and withdraw Bolt
The first step involves in cleaning out your gun is to unload and remove a bolt. If it is your first-time trial, make sure to go through all the specific gun model instructions.
Moreover, withdraw clips and take away the bolt in a rifle. Then clean it with a brush, dry off, and lightly lube the bolt. While doing this step, ensure you clean the extractor and ejector as well with the brush.
Step #2 Swap and wipe Bore
After carefully performing the first step, the next will be cleaning of a bore. For this, set the bolt aside and start cleaning from a chamber. It is suggested to only run a cleaning rod with the attached bronze brush soaked in gun solvent down the barrel and out the muzzle. Once done, repeat this same step to other dirty barrels.
Step #3 Sponge Bore
Now the next one is to run the solvent soaked bronze brush down the barrel again many times to unstick the gunk in the barrel. For this, it is suggested to unscrew the brush at the muzzle at every stroke of the cleaning rod despite pulling it back up and out the chamber. Repeat this step again and again. As per the words of professional hunters, most hunting guns needs to least 25 strokes of a brush.
Step #4 Operate Bore with Patches
The next one is to operate numerous solvent soaked patches down the barrel and out the muzzle end. This is a significant step and does until you are satisfied with the relative cleanliness of the patch. It should be noted that this area will never get white, however, if you still noticing the black effects in term of green and blue colour, keep cleaning it.
Still, if you feel dissatisfied, you are recommended to soak the barrel again for some time and then brush again. If you expect to finish this step earlier, try to use an effective bore cleaning tool of a rifle.
Step #5 Apply an effective Lubrication
The fact is that rifles don’t expect to perform well by adding some oil. To experience a perfect swabbing and scrubbing, one should need an effective coat of rust prevention lubrication. For this, just take a soft cotton cloth and wipe out all the metal surfaces of the gun. Applying an effective lubrication means you are giving a good supplement to it which will endow it to work effectively.
The Air Soft Gun India is a prominent provider of the different sorts of rifles. At Air Soft Gun, you will able to learn a complete guide to cleaning the existing and new guns.